About SniperX

After some years of racing, I started this year (2020) designing my own race frame. My goal was to create a light, strong, and especially easy-to-build frame.

3D Files NOW also on Thingiverse!

Stl files are now also avalible on Thingiverse

Link for the SniperX Light : https://www.thingiverse.com/thing:5163225
Link for the SniperX Sharkbyte : https://www.thingiverse.com/thing:5163226

the sniperx lite racing frame

The Sniper X Light is a TrueX 20×20 stack size frame with 5mm thick separate arms.
The height is 25mm for the stack. The frame’s weight is 61 grams and you’ll receive it with stainless steel Torx a2 quality T10 screws.

The 3d cam mount print is made for the Foxeer Predator Nano with a 1.7mm lens and the VTX holder is specially made for the TBS Unify nano pro32 to get a clean and compact build.

In the near future, I will also add mounts for other nano cams and antenna holders. The design available now is made for the Foxeer micro lollipop.

SniperX MX 3 inch

After a couple of mounts, i get some request from people to make a 3 inch racer, so back to the drawing board and made a super light 27 gram frame, thing is a monster with the right setup.

Frame specs
Sniper Mx 3 inch
High quality carbon fiber
Diagonal motor distance 136mm
3mm thick boomrang arms
AIO or 16x16x stack only
27 gram

I designed also some smart TBS Tracer (crsf) and nano vtx cap mounts for this frame. And a 40-60 degree cam mount.

Here is a video me going on the track



Pilots racing with the SniperX Lite

Get it now!

You  can order your frame directly online by  one of the official SniperX Dealers.